Below guide will teach you How to Replace a Mass Air Flow Sensor (Air Mass Meter) . Please follow the instructions carefully.
Things You’ll Need:
- Screwdriver
- Combination Wrench Set
- Socket and Ratchet Set
- 3/8 in. Drive Ratchet
Estimated Costs:
- DIY Costs: Est. $0.00 parts only
- Shop Costs: Est. $63.24 parts and labor
Instructions:
- Prop the engine hood up and trace the air intake system in your engine compartment.
- Air filter is normally fixed to the air intake boot with clamps right in front of the mass air flow sensor/air mass meter.
- Unfasten the clamps holding the air filter and take it away.
- Next, unfasten the clamps holding the mass air flow sensor/air mass meter to the air intake boot and take it out.
- Examine the mass air flow sensor/air mass meter for any damage or wear.
- Also, check the mass air flow sensor/air mass meter wires as well. Make sure that the wires are not damaged.
- Fit a new mass air flow sensor/air mass meter into its place in air intake boot and secure it with clamps.
- Reconnect the air filter and secure it with clamps. Connect the wiring connectors to the new mass air flow sensor/air mass meter.
Thanks for this post. I was really looking for a good instructions on how to change a mass air meter because my car needs a replacement for it already. I bought a new mass air meter and I didn’t know how to replace it. Good thing I saw this post. Thanks again!